Know more about this product

Helping to better visualize your shoots, the Canon EOS RP Mirrorless Camera with Pro Monitoring Kit from B&H bundles the full-frame mirrorless body with an Atomos Shinobi 5.2" 4K HDMI Monitor, an HDMI cable, and a monitor mount.

Canon EOS RP Mirrorless Camera

Impressively small despite having a large full-frame sensor, the Canon EOS RP offers flexible imaging capabilities along with a portable form factor. Featuring a high-resolution 26.2MP full-frame CMOS sensor along with a DIGIC 8 image processor, both stills and UHD 4K video can be recorded using a broad sensitivity range, from ISO 100-40000, to suit working in a variety of lighting conditions. Continuous shooting is also supported at up to 5 fps for photographing moving subjects. The sensor also facilitates an advanced Dual Pixel CMOS AF system, with 4779 selectable on-sensor phase-detection points for quickly and accurately acquiring focus during stills and video operation.

Complementing the sensor and processor, the RP also sports a 2.36m-dot OLED electronic viewfinder along with a rear 3.0" 1.04m-dot vari-angle touchscreen LCD monitor for easier viewing from high and low angles. Additionally, Wi-Fi and Bluetooth allow for wireless remote camera control along with direct image sharing to linked mobile devices.

Canon RF Lens Mount

The EOS RP features the RF lens mount, which support Canon's line of RF-mount lenses. This mount is characterized by its wide 54mm diameter and short 20mm flange-back distance, which promotes the ability to design lenses that are both faster and smaller than their SLR equivalents. The mount also incorporates a 12-pin electronic contact system for more sophisticated autofocus and image stabilization capabilities. This mount design also lends full compatibility to existing EF and EF-S-mount lenses via an optional EF-EOS R Mount Adapter.

26.2MP Full-Frame CMOS Sensor and DIGIC 8 Image Processor

A large 26.2MP full-frame CMOS sensor is featured and serves as an ideal balance between high-resolution output, low-light performance, and high-speed capabilities. When paired with the DIGIC 8 image processor, the EOS RP has a wide native sensitivity range from ISO 100-40000 for working in a variety of lighting conditions. Additionally, continuous shooting up to 5 fps is possible for working with moving subjects.

Dual Pixel CMOS AF

Dual Pixel CMOS AF offers smooth and fast focusing performance in a similar manner to how a camcorder acquires focus. This system integrates two separate photodiodes within each pixel to provide a broad and dense network phase-detection gathering elements across a majority of the image sensor to reduce focus hunting for faster, more direct control of focus placement. When working with still imagery, this focusing system works to acquire focus quickly and accurately, making it ideally suited to shooting and tracking moving subjects so that critical focus is attained with each shot. When shooting video, a Movie Servo AF mode offers smooth and natural focusing when changing from different subjects or different distances within the scene, as well as the ability to specify tracking sensitivity, AF speed, and Face or Eye Tracking priority. Benefited by the Touch AF system, rack focus is possible simply by touching elements within the scene on the touchscreen in order to change focus in an intuitive manner. Subject tracking in movies is also heightened due to the Dual Pixel CMOS AF system's ability to recognize subjects and maintain focus when working within changing or cluttered scenery. Additionally, the focus system is sensitive down to EV -5 for working in truly low-light conditions with accurate AF capabilities.

UHD 4K Video Recording

Designed for multimedia image-maker, the EOS RP supports UHD 4K (3840 x 2160) resolution recording at up to 23.98 fps at 120 Mb/s, along with Full HD 1080p and HD 720p at 60 fps for slow motion playback. When recording in-camera, 4K video has 4:2:0 sampling and 8-bit color depth, and 4:2:2 8-bit output is possible when using an external recorder.

Audio can be recorded using the on-board stereo microphone or an optional external mic can also be used via the 3.5mm mic jack.

Also, 5-axis Dual Sensing IS can be used when recording video to electronically reduce the appearance of camera shake for sharper, smoother recording.

Body Design

• Integrated 2.36m-dot OLED electronic viewfinder affords a bright and clear means for eye-level viewing.
• Rear 3.0" 1.04m-dot LCD features a vari-angle design for easier use when working from high, low, and front-facing angles. It is also a touchscreen for intuitive control over shooting, playback, and menu navigation controls.
• Built-in Wi-Fi and Bluetooth connectivity enable wireless sharing, control, and image transfer with a compatible smart device via the Canon Camera Connect app, which also supports geotagging your files using your mobile device's location data.
• In-camera charging over USB is supported for easier on-the-go charging.

UPC: 013803313222

Atomos Shinobi 5.2" 4K HDMI Monitor

The Shinobi 5.2" 4K HDMI Monitor is a 5.2" on-camera monitor that monitors DCI 4K, UHD 4K, and HD video input. It features a 10-bit FRC IPS screen with a brightness of 1000 cd/m², which makes it suitable for use in both exterior and interior conditions. The AtomHDR display technology allows you to accurately monitor your log gamma footage without having to view flat, washed-out looking images or use a LUT to compress the dynamic range and color space. The monitor supports popular log formats from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras.

Built to withstand the rigors of production, the Shinobi features a lightweight plastic chassis and powers from a single L-series battery. Additional features include a variety of onscreen exposure analysis, framing, and focus assist tools, as well as anamorphic de-squeeze. A 12V power supply with L-series battery eliminator is included with the unit.

AtomHDR

With AtomHDR you can monitor up to ten stops of dynamic range of your camera's LOG image. Most conventional monitors can only display six or seven stops, which is fine for standard footage; but a Log image will look overly flat. It is also superior to monitoring with a loaded LUT, which can clip the highlights and mask shadows.

Supported Log Formats

• ARRI Log CEI160 / LogCEI200 / LogCEI250 / LogCEI320 /LogCEI400 / LogCEI500 / LogCEI640 / LogCEI800 /LogCEI1000 / LogCEI1280 / LogCEI1600
• Canon CLog / CLog 2 / CLog 3
• Fuji F-Log
• JVC JLog
• Nikon N-Log
• Sony SLog / SLog2 / SLog3
• Panasonic Vlog
• RED Log3G10 / RED LogFilm
• PQ10k
• HLG

HDR Monitoring

• Sony SGamut / SGamut3 / SGamut3.cine
• Canon Cinema / DCI P3 / DCI P3+
• Panasonic V Gamut
• Arri Alexa Wide Gamut
• Rec709 / BT.2020
• JVC
• RED WideGamut / RED DragonColor / DragonColor2
• RED Color2 / RED Color3 / RED Color4

4K DCI/UHD and HD Capabilities

Monitor 4K footage in DCI or UHD formats up to 29.97 fps and 1080p up to 59.94 fps.

Audio Monitoring

Input/output audio via HDMI and output audio using the 3.5mm headphone port for convenient audio monitoring.

5.2" Daylight Viewable Screen

The Shinobi features a 5.2" IPS LCD screen that is illuminated by a bright 1000 cd/m² LED backlight, making it possible to view in daylight without requiring a hood. Plus, the screen is also color calibrated from the factory to ensure accurate image representation.

HDR Signal Management

Log and HDR signals can be difficult to monitor with conventional equipment. Though, with the Shinobi's built-in HDR signal management functions, the log signal can be converted to the PQ standard for compatibility with existing consumer and professional HDR equipment.

Anamorphic De-Squeeze

The Shinobi supports Anamorphic de-squeeze, allowing you to comfortably view anamorphic footage with a squeeze of 2x, 1.5x, 1.33, and Panasonic's 8:3.

UPC: 814164021265

ZILR Hyper-Thin High-Speed Mini-HDMI to HDMI Cable with Ethernet (17.7")

Connect your DCI 4K photo or video camera to your compatible monitor or display with the 17.7" ZILR Hyper-Thin High-Speed Micro-HDMI to HDMI Cable. It supports HDR10 and resolutions up to DCI 4K at 60 Hz for vibrant, ultra-high resolution playback with compatible source equipment and displays.

Supports DCI 4K @ 60 Hz

Experience the ultimate image quality for your digital movies, TV shows, video games, and cinema production. This cable supports resolutions of up to 4K UHD (3840 x 2160) at 60 Hz for connecting digital cameras and video capture devices to 4K Ultra HD TVs. Unlock the latest mirrorless cameras, cinema cameras, and external video recorders for up to DCI 4K (4096 x 2160) at 60 Hz on supported devices for video professionals.

Suitable for Most Cameras

Send uncompressed video via HDMI to your external monitor or recorder to maximize your production workflow.

HDR: Color the Way it Was Intended

Immerse yourself in the most advanced color technology for unparalleled brightness, contrast, and vivid color definition. Experience movies and TV shows in stunning HDR10 with compatible UHD TVs and content. Console and computer gamers will enjoy playing games the way developers intended. Creative professionals can monitor on-set with HDR displays and external recorders to view camera log video for color grading workflows.

Secure Type-A Connection

Just plug in your external monitor or recorder and this cable will remain tightly connected to your external device. The secure connection ensures that the signal will always maintain without loss. For professionals, this means that you can trust this connection throughout the production.

Hyper-Thin with No Compromise

The thinnest cable possible for 4K without compromising on features. Enjoy the flexibility of cable management without wrangling thick cables around your setup.

UPC: 743815949729

Elvid Heavy Duty Camera Shoe Mount Adapter with Ball Head for Monitors

Add a monitor to your video recording system with this aluminum Heavy Duty Camera Shoe Mount Adapter with Ball Head from Elvid. This convenient accessory mounts directly to a camera's shoe mount, and allows for the attachment of a full array of video accessories. Specifically meant to attach monitors or small lights to your camcorder or camera while shooting video, this ball head has a single locking knob for fast and safe operation, and is easily removable.

Accessories attach via the 1/4"-20 screw thread on top, and the bottom features a removable shoe mount and a 3/8" thread. The shoe mount itself is removable and features its own 3/8"-16 mounting screw, in case you want to use it without the ball head.

Note:

Due to its compact design, this ball head should not be used to support a camera.

Removeable shoe mount on bottom and 1/4"-20 screw on top allows for multiple applications

Single locking knob for safe and fast operation

Head itself allows for 90º vertical articulation

Fits most standard shoe mounts (except for Sony flash shoe)

UPC: 847628578029

Atomos Power Kit v2

The Power Kit v2 from Atomos includes two NP-F750 5200mAh batteries, a charger, and a power supply with locking connector for Atomos monitors. The kit enables fast charging of one battery at a time.